BONDUIT CONDUIT ADHESIVE

Bonduit Conduit Adhesive

BonDuit® Conduit Adhesive joins polyethylene duct to PVC, fiberglass, and metal duct using standard PVC couplings. This rapid-cure, two-part resin adhesive forms a durable bond for a strong, permanent, water-tight joint. 

Adhesive Shear Strength

Typical bond strengths were measured by joining two pieces of HDPE conduit with a PVC coupling and BonDuit Adhesive. The force required to pull apart the joint after 24 hours at 70° F was measured.

Hydrostatic (Pressure) Testing

BonDuit Conduit Adhesive forms a water-tight joint. HDPE duct was joined to PVC duct with a PVC coupling and the adhesive. The ducts were filled with water, sealed, pressurized to 60 psi, and observed over time for leakage. The joint was then subjected to a short duration, high pressure test.

BonDuit Conduit Adhesive bonds polyethylene to:

  • PVC Couplings
  • Concrete Vaults
  • Transition Couplings
  • Above Ground Conduits
  • Steel Sweeps and Elbows
  • Fiberglass and Composite Connections

Additional Product Features:

  • Easy to use
  • Fast cure
  • Durable bond
  • Water-tight and air-tight seal
  • High tensile strength
  • Suitable for most common ducts

Ordering Information

Part NumberDescription
BT-KITGKit contains: 2 50-ml BonDuit® Adhesive Cartridges; 8 Mixing Nozzles; 1 Strip of Sanding Cloth; 8 TR-1 Cleaning Wipes; 1 Instruction Sheet; 1 Dispensing Tool
BT-KITKit contains: 2 50-ml BonDuit® Adhesive Cartridges; 8 Mixing Nozzles; 1 Strip of Sanding Cloth; 8 TR-1 Cleaning Wipes; 1 Instruction Sheet (Dispensing tool not included.)
BT-KITB6G Bulk kit contains 6 Individual Kits, BT-KIT. 1 Dispensing Tool Included
BT-KITB6Bulk kit contains 6 Individual Kits, BT-KIT (Dispensing tool not included.)
BT-TOOL 1 Dispensing Tool
BT-CART12PK12 50-ml BonDuit® Adhesive Cartridges in a Package

**Slower curing version BonDuit® Conduit Adhesive available (BTSC). Contact us for more information.