|GRS series 3-piece trunk and distribution connectors are used in low power RF, video, data signals and powered broadband systems. Chassis mounting connectors are used in 5/8-24 equipment entry.
· Independent seizing of the center conductor permits installers to physically verify the center conductor has been seized prior to tightening the back nut
· Placement of the integral mandrel of the connector in the main nut provides a full view of the center conductor’s entrance into the seizing mechanism and requires minimal pull back for ease of installation
· Domed insulator at the KS interface prevents moisture from collecting between the contact pin and connector body, reducing the possibility of corrosion
· The GRS connectors have a center conductor cutting guide