 The Alloptic MicroNode 100 Forward and Return Path RFoG ONU delivers advanced bi-directional, interactive RF services over a passive fiber optic distribution network.The MicroNode 100 RFoG ONU serves as the optical transport layer for RF video, DAVIC, and DOCSIS technologies in deep fiber and FTTH networks. By extending the optical network directly to a home or building, the MicroNode 100 RFoG ONU eliminates neighborhood HFC nodes.This not only removes the costs of the annual testing and maintenance required to operate the HFC nodes, but also the ongoing power requirements of nodes and RF amplifiers.The MicroNode RFoG ONU provides bi-directional services over extended RF frequencies (up to 1.1Ghz) while being agnostic to both headend and customer premises equipment (CPE), and preserving today’s operating processes. Alloptic’s MicroNode 100 RFoG ONU: flexibility to grow your network to meet customer demand now and in the future.
Benefits
¦ Reduces network costs via elimination of HFC nodes
¦ Allows deployment of fiber optic distribution network while leveraging existing RF and DOCSIS investments
¦ Universal support for headend and CPE equipment
¦ High performance, ultra low noise burst mode enables use of full RF spectrum for the return path, resulting in increased available bandwidth
¦ Enables the low maintenance and high reliability of an allfiber access network
¦ Reduced power consumption via green technology
Features
¦ Extended spectrum RF video
¦ Analog & digital video formats
¦ Universal HFC set top box, cable modem and headend support
¦ Transparent return path capability (protocol and modulation format agnostic)
¦ Optical AGC with positive RF up-slope
¦ Supports in-home applications without amplifiers
¦ In-home power over 75 Ohm coax cabling |
| |
| Manufacturer.....................: |
 |
 |
|
|
|
| Product Detail.....................: |
Ordering Information
Part #
MNTH101 ... MicroNode 101 RFoG ONU (42MHz/1310nm RP)
MNTH104 ... MicroNode 104 RFoG ONU (65MHz/1310nm RP)
Power
The following Alloptic power supplies may be used to operate MicroNode 100 RFoG ONUs.
Part #
PSB8000 ... 12VDC, 24W UPS (Charger & 7.2AH battery)
PSB8002 ... 12VDC, 24W UPS hardened (Charger & 7.2AH battery)
PSB1005 ... 12VDC, 24W brick, plug-mounted
PSB1006 ... 12VDC, 24W brick, international plug-mounted
PSB1007 ... 12VDC, brick, plug-mounted, coax feed
PSB1008 ... 12VDC, brick, international plug-mounted, 5mm barrel plug
PSB1009 ... 12VDC, 30W hardened UPS for OSPE202 (240VAC)
PSB1010 ... 12VDC, 30W hardened UPS for OSPE202 (120VAC)
BAT1002 1 ... 2VDC, 7.2AH battery for OSPE202 and PSB8000 series
Mounting
The MicroNode 100 transceivers may be mounted directly on an interior wall or into any of the following Alloptic enclosures.
Part #
OSPE110 ... Enhanced plastic outside enclosure
OSPE120 ... Plastic outside enclosure with NID
OSPE202 ... All-in-One metal outside enclosure
OSPE301 ... MicroNode standard outside enclos |
| Specification Data Sheet....: |
Click Here |
|
|
| |
| |
|
|
| |
|
|
|
| |
|