CABLE EXTENSION ARM

Cable Extension ArmThese Cable Extension Arms are used to support a cable at a distance from the pole.
The messenger cable is held by a standard J1096 suspension clamp which is bolted up against the underside of the two angles by a 5/8" machine bolt. This machine bolt is fitted between the legs of the two angles and can be adjusted for proper extension from the pole.
Mounting is accomplished by a 5/8" or 3/4" machine bolt at the upper position and two 1/2" lag screws at the lower. Mounting bolts and suspension clamp must be ordered separately.

Ordering Information

Part NumberAngle Size (in)Extension from Center of Pole (in)Approximate Ship Weight (per 100 pcs in lbs)
J79203 x 2-1/2 x 1/417-1/2 x 262,900
J79213-1/2 x 2-1/2 x 5/1626-1/2 x 44-1/26,000