| 1 2 3 4 5 |
|
| A-303 Pen Toner |
| Manufacturer: Lemco |
| A pocket-size continuity tester for identifying and troubleshooting drop cable lines. The LED unit, used alone, reads shorts and splitters. This unit can be used to check integrity of new reels of cable before leaving the warehouse. The LED unit and Toner unit, used at each end of a line, identify clean cable lines, assist in isolating problems o... |
|
|
|
|
|
| Combination Trap and 7/16 Tools |
| Manufacturer: Lemco |
| Lemco Trap Wrenches, like Lemco security shield tools, feature solid steel construction.
WT-20 for working with traps and f-fittings within security sleeves.
... |
|
|
|
|
|
| Extension Arm |
| Manufacturer: Lemco |
| The all steel model 1175 extension arm is zinc plated to prevent corrosion. Eight inches of vertical pole clearance are required for installation. It can be installed on all type of poles. Slots are provided for banding to cement, steel, or fiberglass poles. For mounting to wood poles, standard bolt holes are available for use of 5/8" thrubolt and ... |
|
|
|
|
|
| Gas Powered Drill |
| Manufacturer: Lemco |
| Increase strand crew production - more footage per day. This unit has been designed to offer the most lightweight engine drill on the market. The single cylinder, two cycle driving engine was especially selected because of its high power and light-weight, coupled with the most advanced technology, to guarantee years of dependable service. Reversibl... |
|
|
|
|
|
| Ground Rod Cap/ H-207 |
| Manufacturer: Lemco |
| Drive ground rods safely with the Lemco Ground Rod Cap. The 2" diameter surface provides a better target for hammer power, reducing personal injuries due to hammer deflection. Increases speed while protecting ground rods against distortion and damage to finish. Solid steel, plated. Wt. 3 lbs.... |
|
|
|
|
|
| Ground Rod Driver/ H-691 |
| Manufacturer: Lemco |
| Used to install ground rods, the heavy-wall tubular steel handle installs all but the last three feet of rods (of diameters up to ¾"). Installation is completed with the 2¼" diameter medium carbon steel square hammerhead. For additional safety we recommend using the H-207 Ground Rod Cap. ... |
|
|
|
|
|
| Jacket Stripping Tools/ PJ-Series |
| Manufacturer: Lemco |
| These tools strip the polyethylene jacket from plain or flooded cables. They can also be attached to the bushing of the X or XL Corstrip tool for one-step preparations of non-flooded cables.
... |
|
|
|
|
|
| Lemco Cable Caddies |
| Manufacturer: Lemco |
| The Cable Caddies shown here are for use in paying out drop cable during customer installations. Fabricated of sturdy steel tubing and painted utility orange, these devices will yield years of service.
... |
|
|
|
|
|
| Lemco Cable Chute |
| Manufacturer: Lemco |
| The Model No. S1059 Cable Chute guides the cable from the trailer into the path of the strand. The cast aluminum shoe features a UHMW friction-free wear strip. The zinc-plated steel suspension hardware pivots freely under a three-bolt clamp (not supplied) to allow for trailerstrand misalignment. ... |
|
|
|
|
|
| Lemco Cable Puller |
| Manufacturer: Lemco |
| The PR965 Cable Puller is used to pull out cable prior to the lashing operation. The main body of the Cable Puller is a rugged one-piece aluminum casting. Two hardened steel rollers are provided to ride on either 5/16" or 1/4" strand. When pull out pressure is released, a brake automatically holds the Cable Puller in position. Pull out pressure... |
|
|
|
|
| 1 2 3 4 5 |