| 1 2 3 4 5 |
|
| Angle Suspension Clamp |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
Angle Suspension Clamps have curved ends to prevent damage to the messenger strand when turning small angles. All clamps firmly grip 1/4" to 7/16" diameter strand. They are furnished with two track bolts and a center mounting hole.... |
|
|
|
|
|
| B-Beam Clamp |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
The Joslyn J25911 B Beam Clamp is used in conjunction with a 5/8" thimbleye bolt in the application of deadending strand to I beams. A clamping screw allows the clamp to be positioned on the beam flange.
... |
|
|
|
|
|
| B-Strand, Ground Clamp |
| Manufacturer: Maclean Senior Industries |
| Joslyn J7956 Clamps are used to bond the cable sheath to the messenger strand. The Clamp body is made of 1-1/2" x 3/16" steel with an inside keeper riding on the end of the bolt. The 1/2" bolt can be removed to place the clamp over the messenger wire.... |
|
|
|
|
|
| Cable Extension Arm |
| Manufacturer: Maclean Senior Industries |
| These Cable Extension Arms are used to support a cable at a distance from the pole.
The messenger cable is held by a standard J1096 suspension clamp which is bolted up against the underside of the two angles by a 5/8" machine bolt. This machine bolt is fitted between the legs of the two angles and can be adjusted for proper extension from the pole... |
|
|
|
|
|
| Cable Suspension Clamp From Joslyn |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
Joslyn Cable Suspension Clamps are used with through bolts, which serve as a clamping member, and are shaped to securely grip messenger wire to the pole. A nut and square washer is used between the clamp and the pole to provide proper spacing. The J1095 is used for light cables and consists of the clamping members only. A 5/8"... |
|
|
|
|
|
| Carriage Bolt |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
Joslyn carriage bolts are roll threaded with square shoulder and square nut. Manufactured in accordance with ANSI standards.... |
|
|
|
|
|
| Crossover Clamps |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
Joslyn Crossover Clamps for CATV or Telephone Cables are used to clamp two messengers where they cross at right angles. The J7930 Drop Forged Clamp sections are 1-1/2" wide and 3-1/4" long. Two 1/2" diameter bolts have oval shoulders to prevent turning when tightening. The J25564 Clamps are 1-1/2" wide and 3-1/2" long. Two 3... |
|
|
|
|
|
| Dead-Ends (Galvanized Steel) |
| Manufacturer: PLP |
| There is no quicker, easier way to support Figure-8 wire or cable than with PREFORMED dead-ends. Merely strip the messenger and wrap on the dead-end for permanent installation. The helical shape will insure low distribution of holding stresses to prevent premature fatigue. False or double dead-ending can be accomplished without cutting the messeng... |
|
|
|
|
|
| Detachable Pole Steps |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
Detachable Pole Steps are used to prevent unauthorized climbing to the point on a pole where permanent steps are installed. A special 9/16" x 4" fetter drive lag screw permanently attaches the mounting plate to the pole. Twisting is prevented by a punched projection. A nail hole is also provided. The detachable steps can be hu... |
|
|
|
|
|
| Doubling Arming Bolts |
| Manufacturer: Maclean Senior Industries |
| Hot Dip Galvanized
Joslyn Double Arming Bolts are roll threaded, with cone points at both ends for easy driving and removal without damage to threads. Manufactured in accordance with ANSI standards. “D.A.” bolts are furnished with four square nuts and are available with static-proof washer nuts. Other lengths are also available. Length dimension... |
|
|
|
|
| 1 2 3 4 5 |