COYOTE® CLOSURE

COYOTE® Closure

Durable and tested in accordance with Bellcore Testing Requirement GR-771-CORE and UL 1863, the COYOTE Closure will ensure long-term reliability and quality of the signal — voice, video and data. Its compact size disguises its storage capacity. At just 22" (559 mm) long, 6.0" (152 mm) and 8.5" (216 mm) in diameter, it can store up to 288 or 576 fiber splices respectively, using mass fusion splicing.

  • Fiber management system includes splice trays for mass or single splicing (fusion and mechanical).
  • Three-section End Plate has six cable entry ports, captive hardware, strength member tie-off, isolated grounds and requires no field drilling. A four cable entry port version is also available for larger cables.
  • Durable glass-filled high-density thermoplastic shells. Two diameters, 6.0" (152 mm), 8.5" (216 mm). Built-in shell stabilizers and air valve.
  • Field-proven, permanent neoprene gasket sealing system. No re-entry kits needed. No flame required to break the seal or to install.
  • LOCK-TAPE™ Sealing System ensures a tight, permanently sealed End Plate assembly and maximum shear strength to resist cable pull out.

Four types of splice trays are available, two for single fiber splices and two for mass fiber splices. Splice trays, for mass or single fusion and mechanical splicing, are layered above the transition/storage compartment and are easily slipped into place on two studs and secured with a hold down strap. These injection-molded trays have hinged, clear plastic covers for maximum fiber protection that still allows for visible inspection of the fibers. A series of tabs along the tray perimeter are easily removed to simplify routing of the fiber. When replaced, they retain the fiber.

COYOTE Splice Tray kits are available for single or mass fiber splices, offering efficient fiber management for your particular needs. Coyote Splice Trays are 11" (279 mm) long and 5-1/2" (140 mm) wide. The height is 7/16" (11 mm) for single fiber trays, 11/32" (9 mm) for low profile single fiber trays, and 23/32" (18 mm) for mass fiber (ribbon) tray

Ordering Information

Part NumberDescription
80805110 COYOTE Splice Tray - Single fiber (36 count) with fixed rigid slots. Includes one tray, splice count label, tie wraps, and felt strips
80805514 COYOTE Blank Splice Tray Kit with three Elastomer 12-Count Splice Blocks, splice count label, tie wraps and felt strips
80805509 COYOTE Blank Splice Tray Kit Includes one tray, splice count label, tie wraps, and felt strips
8001127 Low Profile COYOTE Splice Tray with three snap-in 12-Count Splice Blocks (fusion splice only)
8001130 Low Profile COYOTE Blank Splice Tray
80805146COYOTE Ribbon Splice Tray for Mass Fusion Splices with fixed rigid slots Includes one tray, splice count label, tie wraps, felt strips, and guide wire kit
80805515 COYOTE Blank Ribbon Splice Tray for Mass Fusion Splices with two Elastomer 12-Count Splice Blocks, splice count label, tie wraps and felt strips
80805510COYOTE Blank Ribbon Splice Tray Kit for Mass Fusion Splices; Includes one tray, splice count label, tie wraps, and felt strips
8003381 Elastomer 12-Count Splice Block Kit - three blocks per kit
80805293 Transport Tube Kit: includes six 34" (0.9 m) long transport tubes, used to bring fiber from the transition compartment to the splice tray
80806439Transport Tube Kit: includes six 34" (0.9 m) long 0.25" (6 mm) O.D. tubes, used for 24-fiber ribbon applications
8003285Color-Coded Transport Tube Kit: includes six 34" (0.9 m) long transport tubes, used to bring fiber from the transition compartment to the splice tray, and color labels