|
| BFA Series |
| Manufacturer: EXFO |
| • Designed for singlemode or multimode fiber, both coated or non-coated, bare fiber or non connectorized components
• Easy fiber positioning
• Repeatable measurements, from test to test, from user to user
The BFA-3000 is an essential accessory for performing fast, accurate and repeatable power measurements on non-connectorized fiber or compone... |
|
|
|
|
|
| FiberConnect |
| Manufacturer: Anritsu |
| • Highly repeatable
• Easy-to-use
• Low insertion loss and back reflection
• Evaluation of fiber span or components without termination
• Significant reduction of test time
The FiberConnect is the ultimate time saving solution for coupling unterminated fiber or optical components to test equipment. By allowing the user to perform optical mea... |
|
|
|
|
|
| OTDR Fiber Rings |
| Manufacturer: AFL |
| Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, r... |
|
|
|
|
|
| OTDR Launch fiber, Access Jumper |
| Manufacturer: Corning |
| Corning Cable Systems offers two OTDR launch cable solutions. Used for connecting between the OTDR and system-under-test, these solutions can also be used on the far end of the system-under-test as a receive fiber. Both options come with a wide variety of configurations depending on customer application. The first solution is a small, portable test... |
|
|
|
|
|
| SPSB |
| Manufacturer: EXFO |
| Used in conjunction with an OTDR, the FTB-SPSB covers the OTDR’s dead zone, enabling loss measurement on the first and last connections of a fiber under test.
Typically, the length of an OTDR’s dead zone is equivalent to that of the optical pulse plus a few meters. The chosen launch test cable should therefore be longer than the pulse dead zone ... |
|
|
|
|
|